Rear brake pads - replace with wheels removed - including handbrake adjustment (if necessary)

Make: Fiat
Model: Ulysse Factory Service Manual
Year: 2002–2010
Section: Disc brakes › Rear brake pads - replace with wheels removed - including handbrake adjustment (if necessary)

BrakesRear brake pads - replace with wheels removed - including handbrake adjustment (if necessary)

REAR BRAKE PADS - REPLACE WITH WHEELS REMOVED - INCLUDING HANDBRAKE ADJUSTMENT (IF NECESSARY)

Operation 3310B64 · REAR DISC BRAKES

- Position the vehicle on a lift.

1. Acting on the adjustment nut, loosen the handbrake control cable.

1. Disconnect the handbrake cable from the mounting on the rear caliper.

1. Undo the bolts fixing the rear brake caliper to the bracket.

2. Move the rear brake caliper (2a) away from the brackets and remove the left and right brake pads (2b).

- Using the special tool, retract the rear brake caliper cylinders.

	Description	Code	Function
	Spanner	1.856.134.000	Positioning brake caliper cylinders

Fit new brake pads with the same specifications as those removed from the housing in the bracket.

- Fit the brake pads inside the brake caliper.

- Fit the rear brake caliper on the disc.

Handle the caliper carefully so that the upper wheel bolt is not subjected to force

- Tighten the bolts fixing the rear brake caliper to the bracket to torque.

- Connect the handbrake cable to the rear brake caliper mounting.

Brake with the engine running, gently and gradually, before driving the vehicle on the road.

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.