Front door closing defective
- Make
- Fiat
- Model
- Multipla Factory Service Manual
- Year
- 1998–2010
- Section
- Doors › Front door closing defective
Fault diagnosisFront door closing defective
FRONT DOOR CLOSING DEFECTIVE
When the central locking is operated using either the key or the remote control or from the inside using the safety knob, one of the front doors does not close properly.
If one door does not close properly, all four doors may close and then re-open after a few moments when the door lock is operated.
| Results of the tests | ||||
| 1 | CHECK DOOR LOCK STRIKER | All OK | Problems met | Operation |
|---|---|---|---|---|
| Check that the lock striker is fixed correctly | Continue to Step 2 | Striker incorrectly secured | Refix the striker correctly Op. 7005A10 | |
| 2 | KEY OPERATION CHECK | All OK | Problems met | Operation |
| Check that the door opens / closes properly using the key | Continue to Step 3 | Faults in the control rods | Re-engage the linkages correctly on the external handle and lock Op. 7005C43 | |
| Lock not fixed correctly | Refit the lock correctly on the door Op. 7005N21 | |||
| 3 | CHECK KNOB OPERATION | All OK | Problems met | Operation |
| Check that the door opens / closes correctly when the safety knob is operated | Continue to Step 4 | Faults in the safety rod | Restore the correct attachment of the safety rod to the lock Op. 7005C67 | |
| Lock not fixed correctly | Refit the lock correctly on the door Op. 7005N21 | |||
| 4 | CHECK OPERATION OF EXTERNAL HANDLE | All OK | Problems met | Operation |
| Check that the door opens / closes correctly when using the outer handle (with the safety lock not on) | Continue to Step 5 | Faults in the control rods | Re-engage the linkages correctly on the external handle and lock Op. 7005C43 | |
| Handle not working | Replace the handle Op. 7005C11 | |||
| Lock not fixed correctly | Refit the lock correctly on the door Op. 7005N21 | |||
| 5 | CHECK OPERATION OF INTERNAL HANDLE | All OK | Problems met | Operation |
| Check that the door opens / closes correctly when the internal handle is operated | Continue to Step 6 | Handle not working | Replace the handle Op. 7005C53 | |
| Faults in the control rods | Restore the correct attachment of the rod to the lock and the handle Op. 7005C51 | |||
| 6 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Search for the fault starting from another symptom' | |
Parts & tools for this job Staging For 1998 Fiat Multipla
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.