Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Multipla Factory Service Manual (1998-2010)22 · Fault diagnosis
22 · Diagnostics

Rear door closing defective

Make
Fiat
Model
Multipla Factory Service Manual
Year
1998–2010
Section
Doors › Rear door closing defective
Fault diagnosisRear door closing defective

REAR DOOR CLOSING DEFECTIVE

When the central door locking is operated with the key or remote control, or from inside using the safety knob, one of the rear doors does not shut properly.

If one door does not close properly, all four doors may close and then re-open after a few moments when the door lock is operated.

Results of the tests
1CHECK DOOR LOCK STRIKERAll OKProblems metOperation
Check that the lock striker is fixed correctlyContinue to Step 2Striker incorrectly securedRefix the striker correctly Op. 7010A10
2CHECK KNOB OPERATIONAll OKProblems metOperation
Check that the door opens / closes correctly when the safety knob is operatedContinue to Step 3Faults in control linkageRestore the connection between link and control mechanism and lock Op. 7010C67
Lock not fixed correctlyRefit the lock correctly on the door Op. 7010N21
3CHECK OPERATION OF EXTERNAL HANDLEAll OKProblems metOperation
Check that the door opens / closes correctly when the external handle is operatedContinue to Step 4Handle not workingReplace the handle Op. 7010C11
Lock not fixed correctlyRefit the lock correctly on the door Op. 7010N21
4CHECK OPERATION OF INTERNAL HANDLEAll OKProblems metOperation
Check that the door opens / closes correctly when the internal handle is operatedContinue to Step 5Handle not workingReplace the handle Op. 7010C42
Faults in lock controlRe-engage the linkage correctly on the lock Op. 7010C51
Lock not fixed correctlyRefit the lock correctly on the door Op. 7010N21
5CHECKING CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosisFault persistsSearch for the fault starting from another symptom'

Parts & tools for this job Staging For 1998 Fiat Multipla

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.