Clutch pedal - adjust travel

Operation 1820A14 · Clutch release mechanical control

Open the bonnet.

Refer to op. 1048A10 air cleaner filtering element - replace

Bed in the clutch pedal by pressing it fully 2 or 3 times.

1. Measure the travel (1b) of the pedal at rest (1c) using a metal ruler (1a).

The travel corresponds to the distance between the position of the pedal at full travel and the position of the pedal when released. Measure the travel half way up the pedal.

If the value measured is different from the specified value, adjust the cable.

2. Tighten or slacken the adjustment nut and adjust the pedal travel to the specified value.

Bed in the clutch pedal by pressing it fully at least 3 or 4 times.

Check the clutch pedal travel again.

Refer to op. 1048A10 air cleaner filtering element - replace