Valve tappets - check and adjust clearance

Operation 1036H10 · TAPPETS AND ROCKER SHAFTS

1.2 8v, 1.4 8v, 1.3 JTD 16V, 1.9 JTD 8V, 1.9 DIESEL

Refer to op. 1048A10 air cleaner filtering element - replace

Refer to op. 1016A20 single cam cover - r + r and replace gasket

Refer to op. 1036H14 valve tappets - check clearance

1. Lower the tappet using the appropriate tool.

2. Fit a tool to hold the tappet down, then withdraw the pressure lever fitted previously.

Refer to op. 1016A22 cam cover with fuel duct - r + r and replace gasket

Refer to op. 1036H14 valve tappets - check clearance

1. Lower the tappet using the appropriate tool.

2. Fit a tool to hold the tappet down, then withdraw the pressure lever fitted previously.

Check the valve clearances Refer to op. 1036H14 valve tappets - check clearance.

Adjust the valve clearances Refer to op. 1036H18 VALVE TAPPETS - Adjust. following clearance check.

1. Remove the valve clearance adjustment pad and replace it using a suitable shim.

Remove the tool for keeping the tappet lowered.

Repeat the above procedure for the remaining valves.

1. Remove the valve clearance adjustment pad and replace it using a suitable shim.

2. Remove the tool for keeping the tappet lowered.

Repeat the above procedure for the remaining valves.

Refer to op. 1036H14 valve tappets - check clearance

Refer to op. 1016A20 single cam cover - r + r and replace gasket

Refer to op. 1048A10 air cleaner filtering element - replace

Refer to op. 1036H14 valve tappets - check clearance

Refer to op. 1016A22 cam cover with fuel duct - r + r and replace gasket