Introduction - CRANKCASE SUMP AND COVERS

1.2 8v

The sump has the task of housing the engine lubrication oil; it is made from pressed steel and includes the port and plug for draining the oil and the anti-splash barrier.

The seal with the crankcase is ensured by a bead of silicone sealant. The timing side and flywheel side covers guarantee the crankshaft seal and are fixed to the crankcase by bolts.

1, Engine block

2, Oil sump

3, Cover, flywheel side

The oil sump or engine lubricant reservoir is responsible for collecting the lubricant to convey it to the point where the oil pump draws the lubricant, sending it under pressure to the lubrication ducts.

1.6 16v

The sump has the task of housing the engine lubrication oil; it is made from pressed steel and includes the port and plug for draining the oil.

The seal with the crankcase is ensured by a bead of silicone sealant. The timing side and flywheel side covers guarantee the crankshaft seal and are fixed to the crankcase by bolts.

1, Engine block

2, Oil sump (lubrication tank)

3, Cover, flywheel side

4, Cover, timing side

5. Auxiliary shaft cover

The oil sump or engine lubricant reservoir is responsible for collecting the lubricant to convey it to the point where the oil pump draws the lubricant, sending it under pressure to the lubrication ducts.

1.9 DIESEL

The oil sump is made of aluminium alloy. Its function is to collect oil for lubricating the engine; it is bolted to the cylinder block. The seal on the join is ensured by a bead of silicone sealant.

The covers on the timing gear and flywheel sides comprise oil seals to seal the crankshaft.

The cover on the timing gear side constitutes the mounting for the oil filter, and incorporates the oil pump (see subgroup 1084).

1, Oil sump

2, Crankshaft front cover

3, Crankshaft rear cover

1.9 JTD 8V

The oil sump is made of aluminium alloy. Its function is to collect oil for lubricating the engine; it is bolted to the cylinder block. The seal on the join is ensured by a bead of silicone sealant.

The covers on the timing gear and flywheel sides comprise oil seals to seal the crankshaft.

The cover on the timing gear side constitutes the mounting for the oil filter, and incorporates the oil pump (see subgroup 1084).

1, Oil sump

2, Crankshaft front cover

3, Crankshaft rear cover

1.4 8v

CONSTRUCTION SPECIFICATIONS

The sump, made from pressed steel, has the task of containing the engine lubrication oil and includes the oil drainage opening and plug. A bead of silicon sealant produces the seal with the crankcase.

The timing and flywheel side covers guarantee the seal on the crankshaft and are secured to the crankcase by bolts.