Cam lift - check with cam cover(s) removed

Operation 0510A30 · Checks on engine

1.2 8v

Op. 1048A10 AIR FILTER ASSEMBLY - R.R..

Op. 4450B04 RIGHT FRONT WHEEL - R.R..

Op. 7055B42 FRONT WHEEL ARCH LINER (ONE), LEFT OR RIGHT - R.R..

Op. 1008b10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE.

Op. 1008a46 TIMING SIDE POWER UNIT RIGID SUPPORT - R.R..

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R.

Op. 1092B60 ALTERNATOR DRIVE BELT - R + R.

Op. 1092A10 CRANKSHAFT PULLEY - R + R.

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT.

Op. 1032B40 TOOTHED DRIVEN PULLEY (ONE) - R + R WITH TIMING BELT REMOVED

Op. 1016A20 SINGLE TAPPET COVER -R.R AND REPLACE GASKET

Op. 1036B32 CAMSHAFT SEAL SUPPORT WITH IGNITION COIL R + R INCLUDING SEAL REPLACEMENT

Op. 1036B10 CAMSHAFT IN CYLINDER HEAD - R.R. ON VEHICLE

Check that the nominal lift of the cams on the valve shaft is within the recommended values.

Op. 1036B10 CAMSHAFT IN CYLINDER HEAD - R.R. ON VEHICLE.

Op. 1036B32 CAMSHAFT SEAL SUPPORT WITH IGNITION COIL R + R INCLUDING SEAL REPLACEMENT.

Op. 1016A20 SINGLE TAPPET COVER -R.R AND REPLACE GASKET.

Op. 1032B40 TOOTHED DRIVEN PULLEY (ONE) - R + R WITH TIMING BELT REMOVED.

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT.

Op. 1092A10 CRANKSHAFT PULLEY - R + R.

Op. 1092B60 ALTERNATOR DRIVE BELT - R + R.

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R.

Op. 1008a46 TIMING SIDE POWER UNIT RIGID SUPPORT - R.R..

Op. 1008b10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE.

Op. 7055B42 FRONT WHEEL ARCH LINER (ONE), LEFT OR RIGHT - R.R..

Op. 4450B04 RIGHT FRONT WHEEL - R.R..

Op. 1048A10 AIR FILTER ASSEMBLY - R.R..

1.9 DIESEL

Op. 5040A10 AIR CONDITIONING REFRIGERANT CIRCUIT - DRYING AND REPRESSURIZING.

Op. 4450B04 RIGHT FRONT WHEEL - R.R..

Op. 7055B42 FRONT WHEEL ARCH LINER (ONE), LEFT OR RIGHT - R.R..

Op. 1008a46 TIMING SIDE POWER UNIT RIGID SUPPORT - R.R..

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R.

Op. 1032B14 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT VERSIONS WITH AIR CONDITIONING.

Op. 1032B40 TOOTHED DRIVEN PULLEY (ONE) - R + R WITH TIMING BELT REMOVED.

Op. 3330D30 VACUUM PUMP - R+R.

Op. 1036B10 CAMSHAFT IN CYLINDER HEAD - R.R. ON VEHICLE.

Check that the nominal lift of the cams on the valve shaft is within the recommended values.

Op. 1036B10 CAMSHAFT IN CYLINDER HEAD - R.R. ON VEHICLE.

Op. 3330D30 VACUUM PUMP - R+R.

Op. 1032B40 TOOTHED DRIVEN PULLEY (ONE) - R + R WITH TIMING BELT REMOVED.

Op. 1032B14 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT VERSIONS WITH AIR CONDITIONING.

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R.

Op. 1008a46 TIMING SIDE POWER UNIT RIGID SUPPORT - R.R..

Op. 7055B42 FRONT WHEEL ARCH LINER (ONE), LEFT OR RIGHT - R.R..

Op. 4450B04 RIGHT FRONT WHEEL - R.R..

Op. 5040A10 AIR CONDITIONING REFRIGERANT CIRCUIT - DRYING AND REPRESSURIZING.

1.9 JTD 8V

Using a magnetic base with a dial gauge, check that the nominal lift of the camshaft cams is within the recommended values.

Adjust the toothed drive pulley screw to rotate the crankshaft.

1.4 8v · from 12/03 · MY 2005

Removing

Proceed with the removal

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Proceed with the removal

Op. 4450B04 RIGHT FRONT WHEEL - R.R.

Proceed with the removal

Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.

Proceed with the removal

Op. 1092B40 AIR CONDITIONER COMPRESSOR/ALTERNATOR DRIVE BELT - R + R

Proceed with the removal

Op. 1092A10 CRANKSHAFT PULLEY - R + R

Proceed with the removal

Op. 1056B60 SINGLE FUEL MANIFOLD PIPE, WITH INJECTORS - R + R

Proceed with the removal

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT

Proceed with the removal

Op. 5530B10 BATTERY - R+R

Proceed with the removal

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R.

Proceed with the removal

Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD R+R

Proceed with the removal

Op. 1072C16 EXHAUST MANIFOLD WITH CATALYTIC CONVERTER - R R

Proceed with the removal

Op. 1036L14 CAMSHAFTS IN CAMSHAFT HOUSING - R.R. WITH CAMSHAFT HOUSING REMOVED - INCLUDES POSSIBLE REPLACEMENT. OF CAMSHAFT HOUSING

Check that the nominal cam lift on the valve axle corresponds to specified values.

Refitting

Proceed with the refitting

Op. 1036L14 CAMSHAFTS IN CAMSHAFT HOUSING - R.R. WITH CAMSHAFT HOUSING REMOVED - INCLUDES POSSIBLE REPLACEMENT. OF CAMSHAFT HOUSING

Proceed with the refitting

Op. 1072C16 EXHAUST MANIFOLD WITH CATALYTIC CONVERTER - R R

Proceed with the refitting

Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD R+R

Proceed with the refitting

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R.

Proceed with the refitting

Op. 5530B10 BATTERY - R+R

Proceed with the refitting

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT

Proceed with the refitting

Op. 1056B60 SINGLE FUEL MANIFOLD PIPE, WITH INJECTORS - R + R

Proceed with the refitting

Op. 1092A10 CRANKSHAFT PULLEY - R + R

Proceed with the refitting

Op. 1092B40 AIR CONDITIONER COMPRESSOR/ALTERNATOR DRIVE BELT - R + R

Proceed with the refitting

Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.

Proceed with the refitting

Op. 4450B04 RIGHT FRONT WHEEL - R.R.

Proceed with the refitting

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

Refill the engine cooling system

Op. 0010T20 ENGINE COOLANT - CHANGE