Front brake calliper bracket - r r

Operation 3310A57 · FRONT DISC BRAKES

1.2 8v, 1.6 16v, 1.3 JTD 16V, 1.9 JTD 8V, 1.9 DIESEL

Removing

Position the vehicle on the lift.

Remove one front wheel, proceed as follows

Op. 4450B02 LEFT FRONT WHEEL - R.R..

1. Release the brake pipe rubber retainer (1a) from its seat (1b) on the shock absorber.

2. Remove the clip fixing the brake caliper to the bracket.

3. Undo the bolts (3a), then move aside the front brake caliper assembly (3b).

1. Undo the retaining bolts.

2. Remove the front brake calliper bracket.

Refitting

Refit the brake caliper to the disc and tighten the fixing bolts on the steering knuckle to torque.

Fit the front brake callipers to the discs.

Secure the brake caliper by tightening both rear bolts.

Whenever the brake calipers are removed, replace the bolts with new ones.

Fit the calliper spring and engage correctly.

Secure the brake pipe to the seat on the shock absorber.

When fitting the hose, check that the retaining block is correctly positioned to prevent the pipe coming into contact with the wheel arch or mechanical parts of the vehicle under any wheel travel or steering conditions.

Refit the front wheel, proceed as follows

Op. 4450B02 LEFT FRONT WHEEL - R.R..

Remove the vehicle from the lift.

1.4 8v, 1.6 16v, 1.3 JTD 16V, 1.9 JTD 8V · from 12/03 · MY 2005

Removing

- Position the vehicle on a lift.

Op. 4450B12 FRONT WHEELS (TWO) - R.R.

Op. 3310A60 FRONT BRAKE PADS - REPLACE

1. Undo the bolts (1a) and remove the front brake caliper bracket (1b).

Refitting

- Position the front brake caliper bracket in its housing and secure it tightening the bolts to the recommended torque.

Op. 3310A60 FRONT BRAKE PADS - REPLACE

Op. 4450B12 FRONT WHEELS (TWO) - R.R.

- Remove the vehicle from the lift.