Left front wheel r r
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- Wheels and hubs › Left front wheel r r
Left front wheel r r
Removing
Position the vehicle on a lift.
Undo the fixing bolts and remove the wheel, complete with hub cap (if fitted).
Refitting
1. Fit the wheel and fit the first bolt (1a) in the opening closest to the inflation valve (1b).
2. Fit the hub cap (if fitted), making sure that the symbol (2a) on the rear of the cover coincides with the inflation valve so that the valve protrudes through the opening (2b).
3. Fit the remaining bolts without tightening them fully.
Lower the vehicle so that the wheels rest on the ground.
Tighten the steel rimmed wheel bolts to the recomended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Bolt | FRONT WHEEL FIXING BOLT | M12 x 1.25 | (Steel rim) 8.6 |
Tighten the alloy rimmed wheel bolts to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Bolt | FRONT WHEEL FIXING BOLT | M12 x 1.25 | (Alloy rim) 9.8 |
Remove the vehicle from the lift.
Parts & tools for this job Staging For 2000 Fiat Doblò
- PARTFront wheel bearingSearch: Fiat Doblò 2000 front wheel bearing
- TOOLBearing puller kitSearch: wheel bearing puller kit
- PARTCV boot kitSearch: Fiat Doblò 2000 cv boot kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.