LEFT CYLINDER HEAD DRIVEN TOOTHED PULLEYS - R.R.

Operation 1032B54 · BELT TIMING SYSTEM

3.2 V6

Removing

Position the vehicle on the ramp

Proceed with removal

Op. 4450B04 RIGHT FRONT WHEEL R R

Proceed with removal

Proceed with removal

Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R

Proceed with removal

Proceed with removal

Op. 1092G10 SINGLE ENGINE BELT R R

Proceed with removal

Proceed with removal

Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R.

Proceed with removal

Proceed with removal

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R

Proceed with removal

Proceed with removal

Op. 1016A42 LEFT HAND CYLINDER HEAD IGNITION COIL COVER - R+R

Proceed with removal

1. Undo the bolts (1a) fixing the driven pullies using the tool (1b) for counter-torque.

Op. 5510C16 LEFT HAND CYLINDER HEAD IGNITION COIL - R+R

Op. 1016A30 LEFT CAM COVER - R + R AND REPLACE GASKET

Op. 1072B50 SLEEVES CONNECTING AIR CAPACITY BOX TO INLET MANIFOLD IS - R+R

Op. 5510C18 RIGHT HAND CYLINDER HEAD IGNITION COIL - R+R

Op. 1016A34 RIGHT-HAND CAM COVER - R + R AND REPLACE GASKET

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT

1. Remove the driven pullies (1a) using the tool (1b).

Refitting

Place the driven toothed pullies back in their housings and secure them without tightening the bolts.

Proceed with refitting

Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT.

Proceed with refitting

Op. 1016A34 RIGHT-HAND CAM COVER - R + R AND REPLACE GASKET.

Proceed with refitting

Op. 5510C18 RIGHT HAND CYLINDER HEAD IGNITION COIL - R+R.

Proceed with refitting

Op. 1072B50 SLEEVES CONNECTING AIR CAPACITY BOX TO INLET MANIFOLD IS - R+R.

Proceed with refitting

Op. 1016A30 LEFT CAM COVER - R + R AND REPLACE GASKET.

Proceed with refitting

Op. 5510C16 LEFT HAND CYLINDER HEAD IGNITION COIL - R+R.

Proceed with refitting

Op. 1016A42 LEFT HAND CYLINDER HEAD IGNITION COIL COVER - R+R.

Proceed with refitting

Op. 1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R.

Proceed with refitting

Op. 1092A10 CRANKSHAFT SERVICES PULLEY - R.R..

Proceed with refitting

Op. 1092G10 SINGLE ENGINE BELT R R.

Proceed with refitting

Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R.

Proceed with refitting

Op. 4450B04 RIGHT FRONT WHEEL R R.

Remove the car from the ramps.