CLUTCH HYDRAULIC ACTUATOR - R.R.

Operation 1820B30 · HYDRAULIC CLUTCH SYSTEM

3.2 JTS

Removing

1. Unscrew the connector and disconnect the hydraulic clutch actuator rigid pipe.

2. Undo the bolts (2a) and remove clutch hydraulic actuator (2b) complete with seal.

Refitting

- Check the condition of the clutch hydraulic actuator sealing ring and moisten slightly with transmission fluid.

- Place the clutch hydraulic actuator in its housing and secure it using the bolts.

- Connect the connector for the rigid pipe to the clutch hydraulic actuator and tighten it.

2.2 JTS, 2.4 JTD 20v

Removing

Op. 4450B12 FRONT WHEELS (TWO) - R+R

Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R

Op. 4410D10 FRONT SUSPENSION FRAME - R+R

Op. 5530B10 BATTERY - R+R

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 1072C43 EXHAUST MANIFOLD UPPER BULKHEAD R R

Op. 1072C42 EXHAUST MANIFOLD LOWER BULKHEAD R R

Op. 2110A10 MANUAL GEARBOX AND DIFFERENTIAL - R + R

Op. 1820B38 HYDRAULIC CLUTCH ACTUATOR WITH COAXIAL CONTROL - R.R WITH GEARBOX REMOVED

Refitting

Op. 1820B38 HYDRAULIC CLUTCH ACTUATOR WITH COAXIAL CONTROL - R.R WITH GEARBOX REMOVED

Op. 2110A10 MANUAL GEARBOX AND DIFFERENTIAL - R + R

Op. 1072C42 EXHAUST MANIFOLD LOWER BULKHEAD R R

Op. 1072C43 EXHAUST MANIFOLD UPPER BULKHEAD R R

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 5530B10 BATTERY - R+R

Op. 4410D10 FRONT SUSPENSION FRAME - R+R

Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R

Op. 4450B12 FRONT WHEELS (TWO) - R+R

Op. 0010T41 MANUAL GEARBOX OIL CHECK LEVEL AND TOP UP IF NECESSARY