Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Alfa Romeo 159 Factory Service Manual (2005-2011)23 · Fault diagnosis
23 · Diagnostics

Alarm siren not working

Make
Alfa Romeo
Model
159 Factory Service Manual
Year
2005–2011
Section
Alarm › Alarm siren not working
Fault diagnosisAlarm siren not working

ALARM SIREN NOT WORKING

1.9 JTS, 2.2 JTS, 3.2 JTS, 1.9 JTD 8V, 1.9 JTD 16V, 2.4 JTD 20V

The siren is connected to the Body Computer Node via the A-Bus dialogue line.

The siren is operated and controlled by the Body Computer Node by means of a series of coded messages; in the case of a failure the Body Computer node detects and memorizes the causes of the malfunction.

The siren is equipped with a battery whose charge is guaranteed in the presence of a +15 supply from the ignition with the alarm system switched off and is managed by the actual siren; the activation/end of charge command is given by the Body Computer

Results of the tests
1CHECK USING DIAGNOSTIC EQUIPMENTAll OKProblems encounteredOperation
Connect the diagnostic equipment ot the diagnostic socket and check for the presence of the siren at the Body Computer Node in the parameters ambientMove on to Step 2Siren not presentCheck the conformity of the vehicle
2SIREN ELECTRICAL EQUIPMENT CHECKAll OKProblems encounteredOperation

Check that the power supply for the siren is correct and check the continuity and insulation for the A-BUS serial line between the Body Computer Node and the siren by carrying out the

See Test 5580EB SIREN FUNCTIONAL TEST

Move on to Step 3
3CHECK USING DIAGNOSTIC EQUIPMENTAll OKProblems encounteredOperation

Connect the Examiner diagnostic equipment to the diagnostic socket and check the following at the Body Computer Node in parameters ambient

. the correct activation of the siren

. the condition of the A-Bus serial line

Move on to Step 4The siren is not activated

Replace the siren

See Test 5580E40 ANTI-THEFT DEVICE SIREN - R+R

Serial line broken

Renew serial line

See E7015 ALARM

4CHECK ON CORRECT OPERATIONAll OKProblems encounteredOperation
Check that the fault is no longer presentEnd of diagnosisThe fault persists

Replace Body Computer

Op. 5505A32 BODY COMPUTER - R.R

Parts & tools for this job Staging For 2005 Alfa Romeo 159

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.