TIMING SYSTEM FIXED CHAIN TENSIONER PAD R R

Operation 1032C41 · TIMING SYSTEM TENSIONERS

1.9 JTS, 2.2 JTS

Removing

- Position the vehicle on a lift.

Op. 4450B04 RIGHT FRONT WHEEL - R.R

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 1092G10 SINGLE ENGINE BELT - R.R

Op. 1092A10 CRANKSHAFT PULLEY - R + R

Op. 1092G14 ENGINE COMPONENT SINGLE BELT MOVING TENSIONER - R + R

Op. 1020D14 FRONT CRANKSHAFT OIL SEAL COVER - R.R AND REPLACE SEALS FOR VERSIONS WITH OIL PUMP ON CRANKSHAFT, TIMING SIDE

Op. 1048A28 VACUUM AIR CIRCUIT RESONATOR PIPE - R+R

Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE

1. Undo the plug for access to the upper bolt securing the chain tensioner fixed pad.

- Undo the upper belt tensioner fixed pad fixing bolt.

1. Undo the lower bolt (1a) and remove the timing fixed tensioner pad (1b).

Refitting

1. Position the fixed timing tensioner (1a) in its housing and secure it tightening the lower bolt (1b) to the recommended torque.

- Tighten the upper bolt fixing the fixed belt tensioner pad to the recommended torque.

- Tighten the access cap to the fixed belt tensioner pad upper fixing bolt to the recommended torque.

Replace the seal.

Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE

Op. 1048A28 VACUUM AIR CIRCUIT RESONATOR PIPE - R+R

Op. 1020D14 FRONT CRANKSHAFT OIL SEAL COVER - R.R AND REPLACE SEALS FOR VERSIONS WITH OIL PUMP ON CRANKSHAFT, TIMING SIDE

Op. 1092G14 ENGINE COMPONENT SINGLE BELT MOVING TENSIONER - R + R

Op. 1092A10 CRANKSHAFT PULLEY - R + R

Op. 1092G10 SINGLE ENGINE BELT - R.R

Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.

Op. 4450B04 RIGHT FRONT WHEEL - R.R

- Remove the vehicle from the lift.