Fuel pressure regulator r r
- Make
- Alfa Romeo
- Model
- 159 Factory Service Manual
- Year
- 2005–2011
- Section
- Petrol injection system › Fuel pressure regulator r r
‹ Prev Cam angle sensor r rNext › Variable valve timing electromagnets in intake/exhaust timinig system r r
EngineFuel pressure regulator r r
FUEL PRESSURE REGULATOR R R
Removing
- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
| Description | Connector | |
|---|---|---|
| Battery | See A001 BATTERY |
1. Disconnect the electrical connection for the fuel pressure regulator.
| Description | Connector | |
|---|---|---|
| 1 | Fuel pressure regulator | See N077 FUEL PRESSURE REGULATOR |
2. Undo the bolts (2a) and remove the fuel pressure regulator (2b).
Refitting
1. Place the fuel pressure regulator (1a) in its housing and secure it tightening the bolts (1b) to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Fuel pressure regulator | Bolt | M12 | (air intake/fuel manifold integrated duct side) 2.0 | 1.9 JTS 2.2 JTS |
2. Connect the electrical connection to the fuel pressure regulator.
- Connect the negative battery terminal.
‹ Prev Cam angle sensor r rNext › Variable valve timing electromagnets in intake/exhaust timinig system r r
Parts & tools for this job Staging For 2005 Alfa Romeo 159
- PARTEngine gasket setSearch: Alfa Romeo 159 2005 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.