Engine oil filler - r.r.
- Make
- Alfa Romeo
- Model
- 159 Factory Service Manual
- Year
- 2005–2011
- Section
- Engine lubrication › Engine oil filler - r.r.
ENGINE OIL FILLER - R.R.
Removing
Op. 1016A10 SOUND-PROOFING COVER - R.R
1. Disconnect the rapid connector for the vacuum intake pipe from the vacuum pump.
2. Loosen the band and disconnect the oil vapour recovery pipe from the engine oil filler.
1. Disconnect the electrical connection from the engine coolant temperature sensor.
| Description | Connector | |
|---|---|---|
| 1 | Engine coolant temperature sensor/sender unit | See K036 ENGINE COOLANT TEMPERATURE SENSOR/SENDER UNIT |
2. Undo the bolts (2a) and remove the engine oil filler (2b).
3. Remove the gasket.
Refitting
- Place the gasket back in its housing.
- Place the engine oil filler fitting in its housing and secure it by tightening the bolts to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Engine oil filler | Bolt | M6 | (cylinder head extension side) 0.8 - 1.0 | 1.9 JTD 16V 2.4 JTD 20V |
- Connect the electrical connection to the engine coolant temperature sensor.
- Connectt the oil vapour recovery pipe to the engine oil filler fitting and tighten the band.
- Connect the vacuum pipe rapid connector to the vacuum pump.
Parts & tools for this job Staging For 2005 Alfa Romeo 159
- PARTEngine gasket setSearch: Alfa Romeo 159 2005 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.