Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Alfa Romeo 159 Factory Service Manual (2005-2011)08 · Engine
08 · Engine

Right upper lambda sensor - r.r.

Make
Alfa Romeo
Model
159 Factory Service Manual
Year
2005–2011
Section
Emission control system › Right upper lambda sensor - r.r.
EngineRight upper lambda sensor - r.r.

RIGHT UPPER LAMBDA SENSOR - R.R.

Operation 1080B93 · EXHAUST EMISSION CONTROL SYSTEM

1.9 JTS, 2.2 JTS

Removing

- Position the vehicle on a lift.

- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

DescriptionConnector
BatterySee A001 BATTERY

1. Disconnect the electrical connection for the right upper Lambda sensor.

DescriptionConnector
1Lambda sensor on pre-catalyzer -2See K016 LAMBDA SENSOR ON PRE-CATALYZER -2
RIGHT UPPER LAMBDA SENSOR - R.R.

- Release the electrical wiring for the right upper Lambda sensor from the clip on the heat shield.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

1. Using a suitable spanner, undo and remove the upper right Lambda sensor.

RIGHT UPPER LAMBDA SENSOR - R.R.

Refitting

1. Position the upper right Lambda sensor in its housing and tighten it to the recommended torque.

ComponentFasteningdiaValue (daNm)Validity
Upper right Lambda sensorM18(exhaust manifold side with catalytic converter) 4.1 - 5.0

1.9 JTS

2.2 JTS

3.2 JTS

RIGHT UPPER LAMBDA SENSOR - R.R.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

- Fasten the electrical wiring for the right upper Lambda sensor to the clip on the heat shield.

- Connect the electrical connection for the right upper Lambda sensor.

- Connect the negative battery terminal.

- Remove the vehicle from the lift.

3.2 JTS

Removing

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

1. Disconnect the electrical connection for the right upper Lambda sensor.

DescriptionConnector
1Lambda sensor on pre-catalyzer -2See K016 LAMBDA SENSOR ON PRE-CATALYZER -2
RIGHT UPPER LAMBDA SENSOR - R.R.

1. Undo and remove the upper right Lambda sensor.

RIGHT UPPER LAMBDA SENSOR - R.R.

Refitting

- Position the upper right Lambda sensor in its housing and tighten it to the recommended torque.

ComponentFasteningdiaValue (daNm)Validity
Upper right Lambda sensorM184.1 ÷ 5.0

- Connect the electrical connection for the right upper Lambda sensor.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Parts & tools for this job Staging For 2005 Alfa Romeo 159

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.