Engine oil drain plug - replace
- Make
- Alfa Romeo
- Model
- 159 Factory Service Manual
- Year
- 2005–2011
- Section
- Crankcase sump and covers › Engine oil drain plug - replace
‹ Prev Crankcase sump - r.r clean mating surfaces and apply sealant for vehicles with air conditioningNext › Crankcase oil sump partition - r.r. with crankcase sump removed
EngineEngine oil drain plug - replace
ENGINE OIL DRAIN PLUG - REPLACE
Engine oil is harmful to skin: keep contact with skin to a minimum and if there is contact wash with soap and water.
- Position the vehicle on a lift.
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.
1. Unscrew the engine oil drain plug.
Collect the engine oil in a suitable container.
- Tighten the new engine oil drain plug to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Engine oil drain plug | 2.0 | 3.2 JTS |
Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.
- Remove the vehicle from the lift.
‹ Prev Crankcase sump - r.r clean mating surfaces and apply sealant for vehicles with air conditioningNext › Crankcase oil sump partition - r.r. with crankcase sump removed
Parts & tools for this job Staging For 2005 Alfa Romeo 159
- PARTEngine gasket setSearch: Alfa Romeo 159 2005 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.