IGNITION COIL/S - R.R.

Operation 5510C14 · COIL, ECU, SENSORS

1.9 JTS, 2.2 JTS

Removing

- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

- Undo the bolts and remove the coil cover.

1. Disconnect the electrical connection from the ignition coil module.

2. Undo the bolts (2a) and remove the ignition coil module (2b).

Refitting

- Fit the ignition coil module in place and secure it using the bolts.

- Connect the electrical connection of the ignition coil module.

- Place the coil cover back in its housing and secure it using the bolts.

- Connect the negative battery terminal.

3.2 JTS

- To remove/refit the left cylinder head ignition coils,

Op. 5510C16 LEFT HAND CYLINDER HEAD IGNITION COIL - R+R

- To remove/refit the right cylinder head ignition coils,

Op. 5510C18 RIGHT HAND CYLINDER HEAD IGNITION COIL - R+R