Workshop Manuals Factory service & repair Land Rover
01 02 WORKSHOP MANUAL SUPPLEMENT03 04 CONTENTS05 06 CONTENTS07 INFORMATION08 09 INTRODUCTION10 GENERAL SPECIFICATION DATA11 ENGINE TUNING DATA12 GENERAL FITTING REMINDERS13 MAINTENANCE14 ENGINE15 EMISSION CONTROL16 ENGINE MANAGEMENT SYSTEM17 FUEL SYSTEM18 COOLING SYSTEM19 MANIFOLD AND EXHAUST SYSTEM20 CLUTCH21 MANUAL GEARBOX22 TRANSFER GEARBOX23 PROPELLER SHAFTS24 STEERING25 FRONT SUSPENSION26 REAR SUSPENSION27 BRAKES28 CHASSIS AND BODY29 PANEL REPAIRS30 AIR CONDITIONING31 WIPERS AND WASHERS32 ELECTRICAL33 INSTRUMENTS
Land Rover TD5 Defender28 · CHASSIS AND BODY
28 · Body & interior

DOOR - REAR

Make
Land Rover
Model
Defender TD5 Defender
Section
DOOR - REAR
CHASSIS AND BODYDOOR - REAR
background image

CHASSIS AND BODY

9

REPAIR

FRONT BUMPER

Service repair no - 76.22.08

Remove

1. Remove 6 screws and remove front grille.
2. Remove 4 through bolts securing front bumper

to chassis longitudinals.

3. Remove front bumper.

Refit

4. Fit front bumper to chassis longitudinals and

secure with bolts.

5. Fit front grille and secure with screws.

DOOR - REAR

Service repair no - 76.28.02.99

Remove

1. Remove nut securing door check strap.

2. With assistance remove 4 bolts securing door to

body and remove door.

Refit

3. With assistance position door and fit but do not

tighten bolts.

4. Align door to body aperture and tighten bolts.
5. Fit and tighten check strap nut.

Parts & tools for this job Staging For Land Rover Defender

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.