Aerial for car radio - r+r

Operation 5570T26 · Car radio and car telephone

Removing

- 7065C30 interior l/h or r/h grab handle (one) - r+r (all)

- 7065C34 l/h or r/h sun blind (one) - r+r (left and right)

- 7040E10 front courtesy light - r+r

- 7040H30 front pillar trim - r r (left and right)

- 7040L40 front compartment scuff strip - r r

- 7050A20 one-piece rear seat cushion - r r

- 7050A10 rear seat - r+r

- 7040H50 rear panel - r r

- 7040G30 boot light bulb holder - r r

- 7040H38 central pillar upper element - r r (side on which to work)

- 7040H42 rear pillar trim - r r (side on which to work)

- 7040H10 roof panel lining - r r

It is not necessary to remove the vehicle ceiling lining. Simply lower it to work on the aerial. It is not therefore necessary to remove the front console with tunnel cover.

1. Disconnect the electrical connection.

2. Unscrew the special nut with notched washer.

1. Working from the vehicle roof, recover the aerial base with cable.

Refitting

Check that the aerial is not damaged.

Fit the cable, position the aerial base and secure from inside with a nut.

Connect the electrical connection.

- 7040H10 roof panel lining - r r

- 7040H42 rear pillar trim - r r (left side)

- 7040H38 central pillar upper element - r r

- 7040G30 boot light bulb holder - r r

- 7040H50 rear panel - r r

- 7050A10 rear seat - r+r

- 7050A20 one-piece rear seat cushion - r r

- 7040L40 front compartment scuff strip - r r

- 7040H30 front pillar trim - r r (left and right)

- 7040E10 front courtesy light - r+r

- 7065C34 l/h or r/h sun blind (one) - r+r (left and right)

- 7065C30 interior l/h or r/h grab handle (one) - r+r (all)

Check to ensure the sound system is working properly.