Rear seat - r+r

Operation 7050A10 · Rear seat assembly

Removing

- 7050A20 one-piece rear seat cushion - r r

1. Release the retaining buttons.

2. Remove the mat under the cushion.

1. Unscrew bolts (1a). If necessary, move the seat structure (1b) using the lever (1c) in order to reach some of the bolts.

2. Undo the pins.

3. Lower the backres (3b) using the lever (3a) and remove the seat assembly.

1. If necessary, undo the bolts (1a) and remove the seat sliding brackets (1b).

Refitting

Check that the seat and the mountings are not damaged.

Position the sliding brackets and secure them using the bolts.

Position the seat and tighten the pins.

Tighten the bolts and position the mat.

Engage the retaining buttons.

- 7050A20 one-piece rear seat cushion - r r

Check that the seat slides and folds over correctly.