Workshop Manuals Factory service & repair Lancia
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Service news bulletins24 Special tools
Lancia Thesis Factory Service Manual (2002-2009)22 · Fault diagnosis
22 · Diagnostics

Central locking alarm not working

Make
Lancia
Model
Thesis Factory Service Manual
Year
2002–2009
Section
Alarm › Central locking alarm not working
Fault diagnosisCentral locking alarm not working

CENTRAL LOCKING ALARM NOT WORKING

(Version Without Keyless Go). The alarm comes on normally but the doors not lock lock;

The alarm system comes on automatically the moment the doors are locked using the remote control.

The command to lock the doors and boot comes from the Body Computer Node to the Driver's Door Node, Passenger Door Node and Luggage Compartment Node.

If one of the doors is not properly shut or the door sensor is signalling this condition, the door cannot be properly locked and this is signalled by a warning beep and the flashing of the direction indicators and the door LEDs for 3 seconds

STEPOPERATIONS TO BE CARRIED OUTTEST RESULTS
0PRELIMINARY CHECKALL OKPROBLEMS ENCOUNTEREDACTION

Check that:

  • the doors can be locked using the keys that come with the vehicle.
Move on to StepThe doors do not closeContinue following the instructions in the table P10 CENTRAL LOCKING NOT WORKING
1CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION

Connect the Examiner diagnostic equipment to the diagnostic socket and check the following at the CAN:

  • that there are no Nodes activated
  • that there are no faulty control units
Move on to Step1. Driver's door node, passenger door node, luggage compartment node not activated

1. Check the node supply and condition

(Wiring Diagram ) E7015 ALARM

2. Driver's door, passenger door, luggage compartment and Body Computer Node faulty2. Carry out the fault diagnosis and follow the instructions for the diagnostic equipment.
2CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION

Keeping the Examiner diagnostic equipment connected to the diagnostic socket, check the following at the Body Computer Node in active diagnosis ambient:

  • the operation of the door locking and unlocking control
Move on to StepThe doors do not close

Replace body computer

See in Op. 5505A32 BODY COMPUTER - R.R.

3CHECK ON CORRECT OPERATIONALL OKPROBLEMS ENCOUNTEREDACTION
Check that the fault is no longer present

Parts & tools for this job Staging For 2002 Lancia Thesis

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.