Exterior mirrors control
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Instrument/gauge electrical circuits › Exterior mirrors control
Electrical equipmentExterior mirrors control
EXTERIOR MIRRORS CONTROL
COMPOSITION
The control for adjusting the exterior mirrors is located on the driver's door.
- 1 Right mirror adjustment
- 2 Neutral position
- 3 Left mirror adjustment
- 4 Folding position
There is a 12 way connector at the rear of the exterior mirrors adjustment control:
12 way connector:
| Pin | FUNCTION |
|---|---|
| 1 | Not connected |
| 2 | Not connected |
| 3 | Not connected |
| 4 | Not connected |
| 5 | Not connected |
| 6 | Not connected |
| 7 | Analogue signal for mirror selection |
| 8 | + Dimmed lighting supply |
| 9 | - Earth |
| 10 | Not connected |
| 11 | Not connected |
| 12 | Analogue signal for mirror adjustment |
OPERATION
Both the exterior rear view mirrors can be adjusted using this device.
The controls consist of a joystick for the adjustments and a selector.
The mirror to be moved is chosen using the selector and the adjustment is made using the joystick.
The folding always applies to both mirrors, irrespective of the current position of the selector.
Parts & tools for this job Staging For 2002 Lancia Thesis
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Lancia touch up paint
- PARTPanel clip assortmentSearch: Lancia panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.