Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Ulysse Factory Service Manual (2002-2010)01 · General information
01 · General

Vehicle towing points

Make
Fiat
Model
Ulysse Factory Service Manual
Year
2002–2010
Section
Vehicle towing and jack points › Vehicle towing points
General informationVehicle towing points

VEHICLE TOWING POINTS

The vehicle is equipped with two threaded seats, one at the front and one at the rear for fitting the tow hook which is in the housing under the bonnet.

VEHICLE TOWING POINTS

Clean the threaded seat carefully before tightening the hook.

Before towing, make sure that the tow hook is fully tightened.

Turn the ignition key to the ON position and then OFF and DO NOT EXTRACT IT !

If the key is extracted the steering lock will come on automatically and it will be impossible to steer the wheels.

When towing the vehicle, it is compulsory to resepct specific highway code regulations relating to the tow hook and procedures for towing on the road.

WARNING: With the engine switched off the brake servo and the power steering are not working so greater effort is required on both the brake pedal and the steering wheel.

Parts & tools for this job Staging For 2002 Fiat Ulysse

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.