Timing system protective cover(s) - r + r
- Make
- Fiat
- Model
- Ulysse Factory Service Manual
- Year
- 2002–2010
- Section
- Timing system › Timing system protective cover(s) - r + r
TIMING SYSTEM PROTECTIVE COVER(S) - R + R
Removing
- Position the vehicle on the lift.
- Disconnect the negative battery terminal.
| Description | Connector | |
|---|---|---|
| Battery | A001B |
Op. 7055B54 UNDER-ENGINE GUARD - R R
Op. 4450B04 RIGHT FRONT WHEEL R R
Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.
Op. 5010B18 CLIMATE CONTROL UNIT AIR INTAKE - R.R.
Op. 5050B34 WINDSCREEN WIPER ARM/S COMPLETE WITH BLADE - R+R
Op. 7210E22 WINDSCREEN BASE TRIM
See in Op. 1088B10
Op. 4130B10 POWER STEERING FLUID RESEVOIR R R
Op. 4130B12 POWER STEERING FLUID RESERVOIR MOUNTING/BRACKETS - POSITION
See in Op. 1008C10
Op. 1016A42 LEFT HAND CYLINDER HEAD IGNITION COIL COVER - R+R
Op. 4410D16 BRACKET (ONE) RETAINING CHASSIS TO BODY - R R
See in Op. 1092A10
See in Op. 1092G15
See in Op. 1092G21
1. Release the power assisted steering system pipe from the mountings and move it.
2. Undo the fixing bolts (2a) and (2b), then remove the lower part (2c) of the protective timing cover.
- Position a hydraulic lift under the engine, timing side.
- Lower the vehicle.
See in Op. 1008A46
1. Undo the fixing bolts (1a) and (1b), then remove the upper parts (1c) and (1d) of the protective timing cover.
Refitting
- Position the upper parts of the protective timing cover and tighten the fixing bolts.
See in Op. 1008A46
- Raise the vehicle.
- Position the lower part of the protective timing cover and tighten the fixing bolts.
- Refit the power assisted steering system pipe.
See in Op. 1092G21
See in Op. 1092G15
See in Op. 1092A10
Op. 4410D16 BRACKET (ONE) RETAINING CHASSIS TO BODY - R R
Op. 1016A42 LEFT HAND CYLINDER HEAD IGNITION COIL COVER - R+R
See in Op. 1008C10
Op. 4130B12 POWER STEERING FLUID RESERVOIR MOUNTING/BRACKETS - POSITION
Op. 4130B10 POWER STEERING FLUID RESEVOIR R R
See in Op. 1088B10
Op. 7210E22 WINDSCREEN BASE TRIM
Op. 5050B34 WINDSCREEN WIPER ARM/S COMPLETE WITH BLADE - R+R
Op. 5010B18 CLIMATE CONTROL UNIT AIR INTAKE - R.R.
Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.
Op. 4450B04 RIGHT FRONT WHEEL R R
Op. 7055B54 UNDER-ENGINE GUARD - R R
- Connect the negative battery terminal.
| Description | Connector | |
|---|---|---|
| Battery | A001B |
Op. 0010T70 POWER ASSISTED STEERING FLUID - REPLACE
Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY
- Remove the vehicle from the lift.
Removing
See in Op. 1088B10
1. Adjust the plastic clip (1a) and move the power assisted steering fluid reservoir (1b) aside.
1. Undo the fixing bolts (1a) and remove the upper reaction rod (1b).
Op. 7055B54 UNDER-ENGINE GUARD - R R
Op. 4450B04 RIGHT FRONT WHEEL R R
Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.
Op. 4410D16 BRACKET (ONE) RETAINING CHASSIS TO BODY - R R
- < R1 > [Right side, front]
See in Op. 1092G10
See in Op. 1092A10
1. Undo the upper bolts fixing the timing side covers.
- Lower the vehicle.
2. Undo the lower bolts fixing the timing side covers.
3. Remove the protective timing covers.
Refitting
- Fit the protective timing covers.
- Tighten the timing cover fixing bolts.
See in Op. 1092A10
See in Op. 1092G10
Op. 4410D16 BRACKET (ONE) RETAINING CHASSIS TO BODY - R R
- < R1 > [Right side, front]
Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.
Op. 4450B04 RIGHT FRONT WHEEL R R
Op. 7055B54 UNDER-ENGINE GUARD - R R
- Fit the upper power unit reaction rod (1a) and tighten the fixing bolts (1b) and (1c) to torque.
| Value - daNm | Fastening | Component | Ø | |
|---|---|---|---|---|
| 4.5 | Bolt | POWER UNIT REACTION ROD |
| Value - daNm | Fastening | Component | Ø | |
|---|---|---|---|---|
| 5 | Bolt | POWER UNIT REACTION ROD |
- Fit the power assisted steering fluid reservoir in place and restore the fastening.
See in Op. 1088B10
Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY
Removing
- Position the vehicle on a lift.
- Raise the vehicle.
Op. 7055B54 UNDER-ENGINE GUARD - R R
Op. 4450B04 RIGHT FRONT WHEEL R R
Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.
See in Op. 1092G10
See in Op. 1092A10
1. Undo the fixing bolts (1a) and remove the lower timing belt cover (1b).
- Lower the vehicle.
1. Undo the fixing bolts and remove the upper timing belt guard.
Refitting
- Fit the upper timing belt guard.
- Raise the lift and fit the lower timing belt guard.
See in Op. 1092A10
See in Op. 1092G10
Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.
Op. 4450B04 RIGHT FRONT WHEEL R R
Op. 7055B54 UNDER-ENGINE GUARD - R R
- Lower the vehicle.
- Remove the vehicle from the lift.
Removing
- Position the vehicle on a lift.
- Raise the vehicle.
Op. 7055B54 UNDER-ENGINE GUARD - R R
Op. 4450B04 RIGHT FRONT WHEEL R R
Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.
See in Op. 1092G10
See in Op. 1092A10
1. Undo the fixing bolts (1a) and remove the lower timing belt cover (1b).
- Lower the vehicle.
1. Undo the fixing bolts and remove the upper timing belt guard.
Refitting
- Fit the upper timing belt guard.
- Raise the lift and fit the lower timing belt guard.
See in Op. 1092A10
See in Op. 1092G10
Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.
Op. 4450B04 RIGHT FRONT WHEEL R R
Op. 7055B54 UNDER-ENGINE GUARD - R R
- Lower the vehicle.
- Remove the vehicle from the lift.
Parts & tools for this job Staging For 2002 Fiat Ulysse
- PARTEngine gasket setSearch: Fiat Ulysse 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.