Power assisted steering fluid - replace
- Make
- Fiat
- Model
- Ulysse Factory Service Manual
- Year
- 2002–2010
- Section
- New vehicles and maintenance › Power assisted steering fluid - replace
‹ Prev Hydraulic clutch system bleed airNext › Coolant for air conditioning system dehydrate and recharge
MaintenancePower assisted steering fluid - replace
POWER ASSISTED STEERING FLUID - REPLACE
1. Undo the plug and remove the power steering fluid filter element.
1. Draw off the oil in the reservoir using a syringe and collect it in a suitable container.
Never disperse used oil into the atmosphere; follow the instructions for the disposal of chemical products and used oil.
1. Fill the power steering system with the appropriate fluid to the MAX notch on the reservoir.
| Description | Qty. | Component | Type | Classification | |
|---|---|---|---|---|---|
| TUTELA GI/A | 1.3 litri | POWER ASSISTED STEERING CIRCUIT | Oil |
- Carefully clean the power steering fluid filter and refit in its seat in the tank, then close the plug.
The power assisted steering system is self-bleeding; this is done by steering completely to the right and the left with the engine running and the vehicle stationary.
‹ Prev Hydraulic clutch system bleed airNext › Coolant for air conditioning system dehydrate and recharge
Parts & tools for this job Staging For 2002 Fiat Ulysse
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Fiat power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.