Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Ulysse Factory Service Manual (2002-2010)08 · Engine
08 · Engine

Cold air intake - r r

Make
Fiat
Model
Ulysse Factory Service Manual
Year
2002–2010
Section
Engine air supply circuit › Cold air intake - r r
EngineCold air intake - r r

COLD AIR INTAKE - R R

Operation 1048A23 · VACUUM AIR CIRCUIT

2.2 16V JTD

Removing

Op. 4450B02 LEFT FRONT WHEEL R R

Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R.

1. Undo the fixing nut (1a) and remove the cold air intake with the built in air intake hose (1b).

COLD AIR INTAKE - R R

Refitting

- Place the cold air intake in position.

- Tighten the fixing nut.

Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R.

Op. 4450B02 LEFT FRONT WHEEL R R

2.0 16V JTD

Removing

Op. 4450B02 LEFT FRONT WHEEL R R

Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R.

1. Undo the fixing nut (1a) and remove the cold air intake with built in air intake hose (1b).

COLD AIR INTAKE - R R

Refitting

- Place the cold air intake in position.

- Tighten the fixing nut.

Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R.

Op. 4450B02 LEFT FRONT WHEEL R R

2.0 16v

Removing

Op. 4450B02 LEFT FRONT WHEEL R R

Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R.

1. Undo the fixing nut (1a) and remove the cold air intake with the built in air intake hose (1b).

COLD AIR INTAKE - R R

Refitting

- Place the cold air intake in position.

- Tighten the fixing nut.

Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R.

Op. 4450B02 LEFT FRONT WHEEL R R

3.0 24V V6

Removing

- Position the vehicle on the lift.

- Disconnect the negative battery terminal.

DescriptionConnector
BatteryA001B

Op. 5010B18 CLIMATE CONTROL UNIT AIR INTAKE - R.R.

See in Op. 1048A10

Op. 4450B02 LEFT FRONT WHEEL R R

Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R.

Op. 7055B65 ENGINGE BAY DUSTGUARD PROTECTION IN LEFT FRONT WHEEL ARCH R R

1. Working from the bottom of the air filter mounting bracket, release the retaining clip.

2. Release the end of the pipe (2b) from the guides (2a).

COLD AIR INTAKE - R R

1. Working via the left wheel arch, undo the fixing bolt (1a) and remove the cold air intake (1b) complete with resonator.

COLD AIR INTAKE - R R

Refitting

- Position the cold air intake and tighten the fixing bolt.

- Position the end of the pipe on the guides for the air filter mounting and attach the retaining clip

Op. 7055B65 ENGINGE BAY DUSTGUARD PROTECTION IN LEFT FRONT WHEEL ARCH R R

Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R.

Op. 4450B02 LEFT FRONT WHEEL R R

See in Op. 1048A10

Op. 5010B18 CLIMATE CONTROL UNIT AIR INTAKE - R.R.

- Connect the negative battery terminal.

DescriptionConnector
BatteryA001B

- Remove the vehicle from the lift.

Parts & tools for this job Staging For 2002 Fiat Ulysse

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.