RHP BRAKE CONNECTION PIPE - R R

Operation 3340B69 · ABS SYSTEM PIPES

Removing

- Position the vehicle on a lift.

1. Unscrew the connector.

2. Disconnect the pipe from the intermediate connector.

1. Unscrew the connector to the intermediate hose.

2. Recover the clip.

3. Disconnect the pipe from the flexible section.

2.2 16V JTD

All versions

- Release the pipe from the body connection bands and remove.

Refitting

- Fit the pipe and secure to the body with the appropriate bands.

- Connect the pipe to the intermediate connector and tighten the connector to the specified torque.

- Fit the clip.

- Tighten the connector on the intermediate hose to the specified torque.

Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY

Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR

Op. 0010T66 MANUAL GEARBOX OIL CHECK LEVEL AND TOP UP IF NECESSARY

- Remove the vehicle from the lift.

- Test the operation of the braking system.