Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Fiat Panda Factory Service Manual (2003-2012)23 · Fault diagnosis
23 · Diagnostics

Sun roof not working

Make
Fiat
Model
Panda Factory Service Manual
Year
2003–2012
Section
Sun roof › Sun roof not working
Fault diagnosisSun roof not working

SUN ROOF NOT WORKING

The sun roof does not move at all when the opening/closing switches are pressed.

The sun roof is controlled by a control unit that receives a direct power supply protected by a fuse and an ignition-controlled supply (+15) in order to allow the operation of the roof with the ignition on.

Results of the tests
0PRELIMINARY CHECKAll OKProblems metOperation
Check the condition of the power supply system protective fuse See E3060 SUN ROOFContinue to Step 1Fuse damagedReplace the burnt fuses and search for the cause of the problem See E3060 SUN ROOF
1ELECTRICAL CIRCUIT CHECKAll OKProblems metOperation
Check the continuity and the insulation of the direct power supply and the ignition-operated supply for the sun roof, checking that the control unit is correctly suppliedContinue to Step 2Electrical conection broken or not insulated.Restore continuity/insulation of electrical connection See E3060 SUN ROOF
2ELECTRICAL CIRCUIT CHECKAll OKProblems metOperation
Check the insulation/continuity of the electrical connection between the sun roof opening/closing control switches and the sun roof control unit See E3060 SUN ROOFContinue to Step 3Electrical conection broken or not insulated.Restore continuity/insulation for the broken electrical connection See E3060 SUN ROOF
3SUN ROOF CONTROL UNIT CHECKAll OKProblems metOperation
Disconnect the sun roof coupling and check that the sun roof control unit is working properlyContinue to Step 4Sun roof control unit malfunction.Replace the sun roof control unit Op. 7030B70
4Continue as instructed by the testerAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosisFault persists

Replace the sun roof opening/closing control switch Op. 7030B64

Search for the fault starting from another symptom'

Parts & tools for this job Staging For 2003 Fiat Panda

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.