Fuel gauge not working
- Make
- Fiat
- Model
- Panda Factory Service Manual
- Year
- 2003–2012
- Section
- Instrument panel › Fuel gauge not working
‹ Prev City warning light does not switch when 'button is operatedNext › Fuel level gauge not working
Fault diagnosisFuel gauge not working
FUEL GAUGE NOT WORKING
The instant consumption reading message is supplied by the Engine Management Control Unit Node which sends it via the C-CAN; the Body Computer Node via the B-CAN to the Instrument Panel Node.
| Results of the tests | ||||
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
| Connect an Examiner to the tester input and check the brake node for the following in error modes: | Continue to Step 2 | The indicator does not move | Replace instrument panel Op. 5560B11 | |
| 2 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
Connect the Examiner diagnostic equipment to the diagnostic connector and check the following through the CAN information:
| Continue to Step 3 | Presence of faults | Continue following the instructions for the diagnostic equipment | |
| 3 | Continue as instructed by the tester | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Replace the engine control unit Op. 1056B82 | |
‹ Prev City warning light does not switch when 'button is operatedNext › Fuel level gauge not working
Parts & tools for this job Staging For 2003 Fiat Panda
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Panda
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.