Engine coolant temperature gauge not working
- Make
- Fiat
- Model
- Panda Factory Service Manual
- Year
- 2003–2012
- Section
- Instrument panel › Engine coolant temperature gauge not working
‹ Prev Fuel reserve warning light not workingNext › Engine coolant overheating warning light not working
Fault diagnosisEngine coolant temperature gauge not working
ENGINE COOLANT TEMPERATURE GAUGE NOT WORKING
With the ignition ON, the engine coolant temperature gauge in the instrument panel is not working;
The engine coolant temperature value message and the engine temperature sensor failure signal is made available by the Engine Management Node on the C-CAN; the Body Computer Node makes the message available to the B-CAN and consequently to the instrument panel
| Results of the tests | ||||
| 0 | PRELIMINARY CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
| Check that, with the engine started, there is no engine coolant temperature sensor failure message and that the engine management warning light is not on | Continue to Step 2 | Presence of failure messages and/or warning light on | Continue to Step 1 | |
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Connect the Examiner diagnostic equipment to the diagnostic socket and check that there are no faults at the engine management node | Continue to Step 2 | Presence of faults | Continue following the instructions for the diagnostic equipment | |
| 2 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Connect the Examiner diagnostic equipment to the diagnostic socket and check at the instrument panel node that the indicator is working through active diagnosis. | Continue to Step 3 | Indicator not working | Replace instrument panel Op. 5560B11 | |
| 3 | Continue as instructed by the tester | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Replace the engine management control unit Op. 1056B82 | |
‹ Prev Fuel reserve warning light not workingNext › Engine coolant overheating warning light not working
Parts & tools for this job Staging For 2003 Fiat Panda
- PARTEngine gasket setSearch: Fiat Panda 2003 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.