Engine coolant overheating warning light not working

Make: Fiat
Model: Panda Factory Service Manual
Year: 2003–2012
Section: Instrument panel › Engine coolant overheating warning light not working

‹ Prev Engine coolant temperature gauge not working Next › Lights check warning light off (initial test not carried out )

Fault diagnosisEngine coolant overheating warning light not working

ENGINE COOLANT OVERHEATING WARNING LIGHT NOT WORKING

1.1, 1.2 8v

With the ignition ON the warning light in the panel is on during the check stage.

The warning light on signal is made available by the Engine Management Node to the C-CAN; the Body Computer Node makes the message available to the B-CAN and consequently to the instrument panel;

1	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
		Results of the tests
	Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket and check at the instrument panel node that the warning light is working properly through active diagnosis.	Continue to Step 2	Warning light not working	Replace instrument panel Op. 5560B11
2	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Keeping the diagnostic equipment (Examiner or other instruments) connected to the diagnostic socket, check at the engine management node that the indicator and the temperature warning light are working properly through active diagnosis.	Continue to Step 3	Indicator not working	Replace the engine control unit Op. 1056B82
3	Continue as instructed by the tester	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis

‹ Prev Engine coolant temperature gauge not working Next › Lights check warning light off (initial test not carried out )

Parts & tools for this job Staging For 2003 Fiat Panda

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.