Valve tappets - check and adjust clearance

Operation 1036H10 · Tappets and rocker shafts

1.1

Refer to op. 1048A10 air cleaner filtering element - replace

Refer to op. 5510C30 engine timing sensor - r+r

Refer to op. 1016A20 single cam cover - r + r and replace gasket

Refer to op. 1036H14 valve tappets - check clearance

1. Lower the tappet using the appropriate tool.

2. Fit a tool to hold the tappet down, then withdraw the pressure lever fitted previously.

1.2 8v

Refer to op. 1048A10 air cleaner filtering element - replace

Refer to op. 5510C30 engine timing sensor - r+r

Refer to op. 1016A20 single cam cover - r + r and replace gasket

Refer to op. 1036H14 valve tappets - check clearance

1. Lower the tappet using the appropriate tool.

2. Fit a tool to hold the tappet down, then withdraw the pressure lever fitted previously.

1.1

1. Remove the valve clearance adjustment pad and replace it using a suitable shim.

Remove the tool for keeping the tappet lowered.

Repeat the above procedure for the remaining valves.

1.2 8v

1. Remove the valve clearance adjustment pad and replace it using a suitable shim.

Remove the tool for keeping the tappet lowered.

Repeat the above procedure for the remaining valves.