Timing CHAIN TENSIONER PLATE - R.R.
- Make
- Fiat
- Model
- Panda Factory Service Manual
- Year
- 2003–2012
- Section
- Timing system › Timing CHAIN TENSIONER PLATE - R.R.
Timing CHAIN TENSIONER PLATE - R.R.
Removing
Remove the car from the ramps.
Disconnect the battery negative terminal.
- 0010T84 coolant for air conditioning system dehydrate and recharge
- 1088B10 engine cooling tank - r + r
- 1008B10 power unit front mount (timing side) flexible block - replace
- 1008A47 rigid power-unit mount - timing side - r r for versions with air conditioner
- 4450B04 right front wheel r r
- 1092G11 Engine components single drive BELT - R.R. for versions with air conditioning
- 1092A12 crankshaft pulley - r+r for versions with air conditioner
- 2110A60 manual gearbox/engine coupling bracket - r+r
- 1020A20 crank case oil sump - r + r clean seals for sealant application
- 1020B12 TIMING COVER with drive chain - R.R. and REPLACE. gasket for versions with air conditioning
- 1032A12 CHAIN AND GEARS for timing system - R.R. for timing or Replacement.
PROCEED AS FOLLOWS FOR THE MOBILE PAD
1. Withdraw pin (1a)a nd remove the mobile pad of timing chain (1b).
PROCEED AS FOLLOWS FOR THE FIXED PAD
1. Undo the bolts (1a) and remove the timing belt fixed pad (1b).
Refitting
PROCEED AS FOLLOWS FOR THE FIXED PAD
Refit the fixed timing belt pad in its seat and secure with bolts.
PROCEED AS FOLLOWS FOR THE MOBILE PAD
Refit the mobile timing belt pad in its seat and secure with bolts.
- 1032A12 CHAIN AND GEARS for timing system - R.R. for timing or Replacement.
- 1020B12 TIMING COVER with drive chain - R.R. and REPLACE. gasket for versions with air conditioning
- 1020A20 crank case oil sump - r + r clean seals for sealant application
- 2110A60 manual gearbox/engine coupling bracket - r+r
- 1092A12 crankshaft pulley - r+r for versions with air conditioner
- 1092G11 Engine components single drive BELT - R.R. for versions with air conditioning
- 4450B04 right front wheel r r
- 1008A47 rigid power-unit mount - timing side - r r for versions with air conditioner
- 1008B10 power unit front mount (timing side) flexible block - replace
- 1088B10 engine cooling tank - r + r
- 0010T11 engine oil check level and top up
- 0010T84 coolant for air conditioning system dehydrate and recharge
Connect the battery negative terminal.
Remove the car from the ramps.
Parts & tools for this job Staging For 2003 Fiat Panda
- PARTTiming belt kitSearch: Fiat Panda 2003 timing belt kit
- TOOLEngine timing tool setSearch: Fiat engine timing tool set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.