Engine RPM SENSOR - R.R.
- Make
- Fiat
- Model
- Panda Factory Service Manual
- Year
- 2003–2012
- Section
- Diesel fuel injection › Engine RPM SENSOR - R.R.
EngineEngine RPM SENSOR - R.R.
Engine RPM SENSOR - R.R.
Removing
Disconnect the battery negative terminal.
1. Disconnect the electrical connection for the rpm sensor.
| Name | Connector | |
|---|---|---|
| 1 | Rpm sensor | K46 |
2. Undo the bolt (2a) and remove the engine rpm sensor (2b).
Refitting
1. Fit the rpm sensor (1a) in place and secure it tightening the bolt (1b) to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1b | Bolt | ENGINE RPM SENSOR | M6 | (Engine crankcase side) 0.8 ÷ 1.0 |
2. Connect the electrical connection for the rpm sensor.
| Name | Connector | |
|---|---|---|
| Rpm sensor | K46 |
Connect the battery negative terminal.
Parts & tools for this job Staging For 2003 Fiat Panda
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.