Cam angle sensor - r r

Operation 1060G22 · Pressure pump electric control

1.3 JTD 16v

Removing

Remove the car from the ramps.

Disconnect the battery negative terminal.

1. Disconnect the electrical connection from the air flow meter.

2. Loosen the band and disconnect the the turbocharger air inlet sleeve from the rigid pipe, air flow meter side.

1. Remove the air filter (1a) complete with air flow meter (1b) by releasing from the underlying pins and then from the rear fastenings.

1. Disconnect the electrical connection from the cam angle sensor.

2. Undo the bolt (2a) and remove the cam angle sensor (2b).

Refitting

Fit the cam angle sensor in place and fix it using the bolts.

Connect the electrical connection to the cam angle sensor.

Fit the air filter complete with air flow meter in place.

Connect the air intake sleeve to the turbocharger, air flow meter side, and tighten the band.

Connect the electrical connection to the air flow meter.

Connect the battery negative terminal.

Remove the car from the ramps.