Pressure relief sensor - r r

Operation 1060G16 · Pressure pump electric control

1.3 JTD 16v

Removing

Disconnect the battery negative terminal.

1. Disconnect the electrical connection from the air flow meter.

2. Loosen the band and disconnect the air inlet hose to the turbocharger.

1. Remove the air filter (1a) complete with air flow meter (1b) by releasing from the underlying pins and then from the rear fastenings.

1. Release the electrical wiring (1a) from the band (1b) and move it aside.

2. Disconnect the electrical connection from the excess pressure sensor.

3. Undo the bolt (3a) and remove the over-pressure sensor (3b).

Refitting

Fit the excess pressure sensor in place and fix it using the bolt.

Connect the electrical connection to the excess pressure sensor.

Fit the electrical wiring in place and fasten it using the band.

Fit the air filter complete with air flow meter in place.

Connect the air inlet hose to the turbocharger and tighten the band.

Connect the electrical connection to the air flow meter.

Connect the battery negative terminal.