Front brake pads - replace

Operation 3310A60 · FRONT DISC BRAKES

1.1, 1.2 8v

Removing

Place the car on a ramp.

- 4450B12 front or rear wheels (two) - r+r

1. Remove clip (1a) and remove lower pin (1b).

Turn the brake caliper upwards.

2. Remove the brake pads from the bracket and replace them.

Repeat the same procedure for the remaining front brake pads.

1.3 JTD 16v

Removing

Place the car on a ramp.

Remove the left front wheel.

- 4450B02 left front wheel r r

Remove the right front wheel.

- 4450B04 right front wheel r r

1. Undo the bolts (1a), then move the front brake calipers (1b) away from the work area.

1.1, 1.2 8v

Refitting

Measure the thickness of the brake pads and check whether the thickness is less than the minimum permissible value.

Fit new brake pads to the bracket.

Turn the brake caliper down and fasten by refitting the lower pin.

Lock the lower pin in position using the clip removed previously.

Check the condition of the clip and ensure it is properly fitted in its seat on the lower pin.

- 4450B12 front or rear wheels (two) - r+r

Remove the vehicle from the lift.

1.3 JTD 16v

1. Remove the front brake pads from their seatings on the brackets and replace them.

Repeat the same procedure for the remaining front brake pads.

Refitting

Fit the front brake pads in their seats on the brackets.

Fit the front brake calipers to the discs and brackets.

Tighten to torque the bolts securing the calipers to the brackets.

Fit the left front wheel.

- 4450B02 left front wheel r r

Fit the right front wheel.

- 4450B04 right front wheel r r

Remove the vehicle from the lift.