Left front wheel r r
- Make
- Fiat
- Model
- Panda Factory Service Manual
- Year
- 2003–2012
- Section
- Hubs and wheels › Left front wheel r r
Left front wheel r r
Removing
Place the car on a ramp.
For wheels with steel rims, remove the wheel hub cap.
1. With the wheels resting on the ground, loosen the bolts fixing the left front wheel.
Raise the lift.
2. Completely undo the bolts and remove the steel or alloy rimmed wheel.
Refitting
Fit the wheel and fix it using the bolts without tightening them.
Lower the vehicle until the wheel is touching the ground.
Tighten the steel rimmed wheel bolts to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Bolt | FRONT WHEEL FIXING BOLT | M12 x 1.25 | (Steel rim) 8.6 |
Tighten the aloy rimmed wheel bolts to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Bolt | FRONT WHEEL FIXING BOLT | M12 x 1.25 | (Alloy rim) 9.8 |
For steel rimmed wheels, fit the wheel hub.
Remove the vehicle from the lift.
Parts & tools for this job Staging For 2003 Fiat Panda
- PARTFront wheel bearingSearch: Fiat Panda 2003 front wheel bearing
- TOOLBearing puller kitSearch: wheel bearing puller kit
- PARTCV boot kitSearch: Fiat Panda 2003 cv boot kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.