Alarm volumetric surveillance not working

Fault diagnosisAlarm volumetric surveillance not working

ALARM VOLUMETRIC SURVEILLANCE NOT WORKING

When the alarm is operated the volumetric surveillance does not work

tt is possible to exclude volumetric surveillance from system operation (see DESCRIPTION AND OPERATION: 5580E anti-theft device).

1	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
		Results of the tests
	Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket Check, in order: no faults in the alarm control unit no faults in the alarm receiver	Continue to Step 2	Error detected in the control unit or receiver	Continue according to the instructions for the diagnostic equipment
		Continue to Step 2	Dialogue failure for diagnostic equipment between the control unit and the receiver	Restore the connection between the control unit and the diagnostic connector ( See E7015 ALARM).
2	CHECK VOLUMETRIC SENSORS	All OK	Problems met	Operation
	Check, in order: operation of volumetric sensors connections between sensors and alarm control unit See E7015 ALARM).	Continue to Step 3	Sensor faulty	Replace sensor Op. 5580E22.
		Continue to Step 3	Connections broken	Restore the connections
3	CHECKING CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Search for the fault starting from another symptom'

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.