Alarm central locking not working
- Make
- Fiat
- Model
- Multipla Factory Service Manual
- Year
- 1998–2010
- Section
- Alarm › Alarm central locking not working
Fault diagnosisAlarm central locking not working
ALARM CENTRAL LOCKING NOT WORKING
When the alarm is operated, the doors do not open/close at all.
| Results of the tests | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|---|---|---|---|
| Preliminarily check the manual operation of the central locking | Continue to Step 1 | Central locking not working, not even manually | See table P10 | |
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket Check that there are no faults in the alarm receiver | Continue to Step 2 | Error detected in the receiver | Continue according to the instructions for the diagnostic equipment | |
| Dialogue failure for diagnostic equipment between the control unit and the receiver | Restore the connection between the control unit and the diagnostic connector ( See E7015 ALARM). | |||
| 2 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Search for the fault starting from another symptom' | |
Parts & tools for this job Staging For 1998 Fiat Multipla
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Multipla
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.