Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Multipla Factory Service Manual (1998-2010)08 · Engine
08 · Engine

Introduction - PISTONS AND CONNECTING RODS

Make
Fiat
Model
Multipla Factory Service Manual
Year
1998–2010
Section
Pistons and connecting rods › Introduction - PISTONS AND CONNECTING RODS
EngineIntroduction - PISTONS AND CONNECTING RODS

Introduction - PISTONS AND CONNECTING RODS

1.9 JTD 8V

CONNECTING RODS

The connecting rods are made from hardended and tempered steel, with a copper bush (1) fitted for matching with the gudgeon pin (2).

The floating gudgeon pins are secured by two circlips (3) seated in specific grooves in the piston skirts.

Introduction - PISTONS AND CONNECTING RODS

PISTONS

The light aluminium-silicon alloy pistons with autothermic inserts are graded in three sizes.

The "OMEGA" combustion chamber is located in the piston crown to improve combustion.

Two copper alloy bushes assist the matching with the gudgeon pin.

Introduction - PISTONS AND CONNECTING RODS

1, Piston

2, Injector

3, Heater plug

4, Air inlet

5, Exhuast gas outlet

Parts & tools for this job Staging For 1998 Fiat Multipla

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.