LAMBDA SENSOR - R.R.

Operation 1080B60 · Exhaust emission control system

1.6 16v

Removing

With the ignition key in the OFF position, disconnect the battery negative terminal.

Place the car on a ramp.

1. Disconnect the electrical connection for the Lambda sensor.

Release the lambda probe electric cables from the bands on the engine bulkhead.

Raise the car.

2. Release the lambda probe lead from the bracket.

3. Unscrew the lambda probe and remove from the exhuast pipe.

Refitting

Check the condition and electrical continuity of the lambda probe.

Screw the lambda probe onto the exhaust pipe. Tighten to the specified torque.

Fit the electrical wiring into its seat.

Lower the lift.

Connect the electrical connector.

Secure the wiring to the bulkhead.

Remove the vehicle from the ramp.