Engine oil heat exchanger - r + r

Operation 1084C10 · Engine oil cooling circuit

1.9 JTD 8V

Removing

- 1084B30 engine oil filter r r

Position a suitable container beneath the heat exchanger to collect the coolant fluid.

1. Disconnect the engine coolant inlet and outlet pipes to the heat exchanger.

2. Unscrew retaining pin (2a) and remove heat exchanger (2b).

Refitting

Fit the heat exchanger to the front oil pump cover.

Tighten the heat exchanger retaining pin to torque.

Connect the engine coolant inlet and outlet pipes to the engine oil heat exchanger.

Check the amount of coolant present in the engine.

Top if using the same coolant if necessary.