Turbo charger intercooler - r + r
- Make
- Fiat
- Model
- Multipla Factory Service Manual
- Year
- 1998–2010
- Section
- Engine air supply circuit › Turbo charger intercooler - r + r
Turbo charger intercooler - r + r
Removing
Place the car on a ramp.
- 4450B10 Front WHEEL (one) - R.R.
- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.
1. Remove clamp (1a) and disconnect turbocharger air line (1b).
2. Unscrew the retaining bolts and nut.
3. Remove the air exchanger with shroud.
Refitting
Check the condition of the exchanger.
Tighten the retaining bolts and nut.
Connect the air pipe to the turbocharger using a new clamp.
- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.
- 4450B10 Front WHEEL (one) - R.R.
Remove the vehicle from the ramp.
Parts & tools for this job Staging For 1998 Fiat Multipla
- PARTEngine gasket setSearch: Fiat Multipla 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.