Ignition coil/s - r+r

Operation 5510C14 · Coil, ecu, sensors

1.6 16v

Removing

1. Disconnect the electricaly supply connection for the ignition coils.

2. Disconnect the high tension leads for the spark plugs from the coils.

3. Undo the bolts fixing the coils to the mounting.

4. Remove the ignition coils.

If necessary, remove the ignition coils mounting following the steps described below.

1. Open the bands retaining the electrical wiring.

2. Undo the nuts fixing the coils mounting to the camshaft housings.

3. Remove the ignition coils mounting.

Refitting

Check that the coils are not damaged.

If removed, refit the ignition coils mounting.

Tighten the fixing nuts to the recommended torque.

Position the ignition coils.

Tighten the bolts fixing the coils to the mounting.

Connect the high tension leads for the spark plugs to the coils.

Connect the electrical supply connection for the ignition coils.

Check the operation of the ignition system.