Handbrake/linkage protection - r+r

Operation 3380A44 · Handbrake control and linkage

Removing

1. Open the left side door and remove the protective boot for the handbrake lever.

2. Undo the adjustment nut (2a), then disconnect the cable (2b) from the handbrake lever.

Place the car on a lift.

Raise the ramp.

1. Move the handbrake cable backwards, removing it via the opening towards the passenger compartment, then recover the cable protective boot (1b).

Refitting

Position the cable in the protective boot.

Pass the cable through the opeing connected with the passenger compartment.

Lower the lift.

Position the handbrake cable and tighten the adjustment nut without locking it.

- 3380A04 handbrake - check travel