1020 crankcase sump and covers
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- 10 engine › 1020 crankcase sump and covers
Tightening torques1020 crankcase sump and covers
1020 CRANKCASE SUMP AND COVERS
| Component | Fastening | Ø | Value (daNm) | Validity |
|---|---|---|---|---|
| AUX SHAFT SEAL COVER | Bolt | M6 | (Engine crankcase side) 0.9 | 1.6 16v |
| AUX SHAFT SEAL COVER | Bolt | M6 | 1.1 | 1.6 16v |
| AUXILIARY SHAFT DRIVEN GEAR | Bolt | M10 | 8 | 1.6 16v |
| CRANKSHAFT FRONT COVER | Bolt | M6 | 0.8 - 1.0 | 1.9 JTD |
| CRANKSHAFT FRONT COVER | Bolt | M6 | (Crankcase) 1 | 1.2 8v |
| CRANKSHAFT FRONT COVER | Bolt | M6 | 0.8 ÷ 1.0 | 1.3 JTD 1.9 JTD |
| CRANKSHAFT FRONT COVER | Bolt | M6 | 0.7 | 1.6 16v |
| CRANKSHAFT FRONT COVER | Bolt | M6 | 0.9 | 1.6 16v |
| CRANKSHAFT FRONT COVER | Bolt | M6 | (Crankcase) 0.9 | 1.9 DIESEL |
| CRANKSHAFT FRONT COVER | Bolt | M6 | (Crankcase) 0.9 | 1.9 DIESEL |
| CRANKSHAFT FRONT COVER | Bolt | M6 | 0.9 | 1.9 DIESEL |
| ENGINE OIL DRAIN PLUG | M18 | (Crankcase sump side) 1.8 ÷ 2.2 | 1.9 JTD | |
| ENGINE OIL DRAIN PLUG | Bolt | M6 | (Engine crankcase side) 0.8 ÷ 1.1 | 1.9 JTD |
| ENGINE OIL DRAIN PLUG | Plug | M18 | (Crankcase sump side) 1.8 ÷ 2.2 | 1.9 JTD |
| ENGINE OIL DRAIN PLUG | Plug | 5 | 1.2 8v | |
| ENGINE OIL DRAIN PLUG | Plug | M18 x 1.5 | 2 | 1.2 8v 1.6 16v 1.9 DIESEL |
| ENGINE OIL DRAIN PLUG | M14 | (Crankcase sump side) 1.8 ÷ 2.2 | 1.3 JTD | |
| ENGINE OIL DRAIN PLUG | Plug | M22 | 5 | 1.6 16v |
| FLYWHEEL SIDE COVER | Bolt | M6 | 0.8 - 1.0 | 1.9 JTD |
| FLYWHEEL SIDE COVER | Bolt | M6 | 0.8 - 1.0 | 1.9 JTD |
| FLYWHEEL SIDE COVER | Bolt | M6 | (Crankcase) 1 | 1.2 8v |
| FLYWHEEL SIDE COVER | Bolt | M6 | 1 | 1.2 8v |
| FLYWHEEL SIDE COVER | Bolt | M6 | 0.9 | 1.6 16v |
| FLYWHEEL SIDE COVER | Bolt | M6 | (Crankcase) 0.9 | 1.9 DIESEL |
| FLYWHEEL SIDE COVER | Bolt | M6 | 0.9 | 1.9 DIESEL |
| OIL BULK HEAD | Bolt | M6 | 0.5 ÷ 0.6 | 1.9 JTD |
| OIL SUMP | Bolt | M6 | (Engine crankcase side/flywheel side oil seal cover) 0.8 ÷ 1.1 | 1.9 JTD |
| OIL SUMP | Bolt | M8 | (Engine crankcase side/flywheel side oil seal cover) 2.3 ÷ 2.8 | 1.9 JTD |
| OIL SUMP | Front and rear bolts | M6 | 0.7 - 0.9 | 1.9 JTD |
| OIL SUMP | Side bolts | M8 | 2.1 - 2.6 | 1.9 JTD |
| OIL SUMP | Bolt | M6 | (Cylinder block/crankcase) 1 | 1.2 8v |
| OIL SUMP | Bolt | M6 | 1 | 1.2 8v |
| OIL SUMP | Bolt | M6 | 1 | 1.2 8v |
| OIL SUMP | Nut | M6 | (Covers) 0.7 | 1.2 8v |
| OIL SUMP | Nut | M6 | 0.7 | 1.2 8v |
| OIL SUMP | Nut | M6 | 0.7 | 1.2 8v |
| OIL SUMP | Bolt | M6 | (Lower engine crankcase side) 0.8 ÷ 1.0 | 1.3 JTD |
| OIL SUMP | Nut | M6 | (Timing cover side) 0.8 ÷ 1.0 | 1.3 JTD |
| OIL SUMP | Bolt | M6 | 0.9 | 1.6 16v |
| OIL SUMP | Bolt | M6 | (crankcase) 0.9 | 1.9 DIESEL |
| OIL SUMP | Bolt | M8 | (crankcase) 2.5 | 1.9 DIESEL |
| OIL SUMP | Front and rear bolts | M6 | 0.9 | 1.9 DIESEL |
| OIL SUMP | Side bolts | M8 | 2.5 | 1.9 DIESEL |
| OIL SUMP | Side bolts | M8 | 2.5 | 1.9 DIESEL |
| TIMING COVER | Bolt | M6 | 0.8 ÷ 1.0 | 1.3 JTD |
| TIMING COVER | Nut | M6 | 0.8 ÷ 1.0 | 1.3 JTD |
Parts & tools for this job Staging For 2000 Fiat Doblò
- PARTEngine gasket setSearch: Fiat Doblò 2000 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.