I.e. failure warning light on
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- Instrument panel › I.e. failure warning light on
I.E. FAILURE WARNING LIGHT ON
The engine management control unit warning light remains on. The CODE warning light comes on and goes out.
The CODE warning light going out means that the dialogue between the two control units has gone well. The engine management control unit warning light remaining on permanently means there is an error in the system
| Results of the tests | ||||
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
| 1.2 8v | Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket Check that there are no errors in the control unit | Error detected in defective control unit | Replace control unit Op. 1056B82 Search for the fault starting from another symptom' | |
| 1.9 DIESEL | Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket Check that there are no errors in the control unit | Error detected in defective control unit | Replace control unit Op. 1060D80 Search for the fault starting from another symptom' | |
Parts & tools for this job Staging For 2000 Fiat Doblò
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Doblò
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.