Abs working irregularly
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- Braking system › Abs working irregularly
Fault diagnosisAbs working irregularly
ABS WORKING IRREGULARLY
*
| Results of the tests | ||||
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
Connect the diagnostic equipment and check:
| Continue to Step 2 | Error detected in the control unit | Continue following the instructions for the diagnostic equipment | |
| Incoherent parameter | Continue following the instructions for the diagnostic equipment | |||
| 2 | ROAD TEST WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
Road test the vehicle, reproducing the conditions in which the fault arises, keeping the diagnostic equipment connected.
| Continue to Step 3 | Error detected in the control unit | Continue following the instructions for the diagnostic equipment | |
| Incoherent parameter | Continue following the instructions for the diagnostic equipment | |||
| 3 | ACTIVE DIAGNOSIS WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
Carry out active diagnosis of:
| Continue to Step 4 | Solenoid valves not working | Replace the ABS unit Op. 3340A12 | |
| Pump motor not working | Replace the ABS unit Op. 3340A12 | |||
| 5 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | Fault persists Control unit defective | Replace control unit Op. 3340A12 Search for the fault starting from another symptom' | ||
Parts & tools for this job Staging For 2000 Fiat Doblò
- TOOLOBD2 scanner with ABSSearch: OBD2 scanner ABS SRS
- TOOLDigital multimeterSearch: automotive digital multimeter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.